TM 9-2330-335-14&P
0005-6
0005
PREPARATION FOR USE - CONTINUED
5.
Raising Landing Gear.
WARNING
Ensure landing leg scissor assemblies retaining (hitch) pins are installed extending inward. If
installed extending outward, they will be a contact hazard and may result in injury to personnel.
a.
Lift crank (Figure 5, Item 1) from crank hanger (Figure 5, Item 2).
b.
Raise crank (Figure 5, Item 1) to operating position. Pull crank out for high speed operation.
c.
Turn crank (Figure 5, Item 1) counterclockwise until legs (Figure 5, Item 3) are retracted fully.
d.
Lower crank (Figure 5, Item 1) and secure in crank hanger (Figure 5, Item 2).
e.
Remove and stow ground boards (Figure 5, Item 4), if used.
Figure 5.
Landing Legs.
05
447-0021