TRAILER CONNECT - Continued
3.
Back up vehicle until coupler (Figure 1, Item 4) is approximately 6.0 in. (152.4 mm)
from trailer drawbar (Figure 1, Item 3).
2
1
3
4
Figure 1.
Trailer Connect.
4.
Refer to applicable operator manual and set vehicle parking brakes and set
transmission to Neutral (N).
NOTE
•
Trailer air bag must be charged with air for air assist lever to work.
•
Move air assist lever up to raise drawbar and down to lower
drawbar.
•
Retract drawbar prior to lifting drawbar with air assist.
5.
If necessary, charge trailer air bag air using trailer BII quick disconnect charging hose
(WP
0022) or using standard air line hookup.
6.
Move air assist lever (Figure 1, Item 2) on drawbar air assist valve (Figure 1, Item 1)
to UP position and raise drawbar (Figure 1, Item 3) to level of coupler (Figure 1, Item
4).
7.
Place air assist lever (Figure 1, Item 2) in NEUTRAL position.
8.
Place drawbar ring (Figure 2, Item 12) in coupler (Figure 2, Item 13) and push coupler
latch (Figure 2, Item 7) down until it is latched in place.
TM 9-2330-342-10
0012
0012-2