TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 115 of 500

OPERATOR MAINTENANCE

TRAILER BACKING WITH TURNTABLE LOCKED

INITIAL SETUP:

Not Applicable

TRAILER BACKING

CAUTION

Backing the trailer for minor repositioning is permitted without locking the

turntable, provided caution is used when backing up. Failure to keep the

trailer and vehicle aligned while backing up could result in the trailer

jackknifing, possibly causing severe drawbar and vehicle damage.

1.

Lift up on locking ring (Figure 1, Item 2) and remove safety pin (Figure 1, Item 3) from

pin (Figure 1, Item 1).

3

3

5

4

7

6

2

1

1

2

Figure 1.

Trailer Backing with Turntable Locked.

2.

Remove pin (Figure 1, Item 1) from stowage hole (Figure 1, Item 5).

3.

Align turntable locking hole (Figure 1, Item 7) and locking hole (Figure 1, Item 6) in

stowage bracket (Figure 1, Item 4) and install pin (Figure 1, Item 1).

4.

Install safety pin (Figure 1, Item 3) in pin (Figure 1, Item 1) and engage locking ring

(Figure 1, Item 2).

TM 9-2330-342-10

0013

0013-1