Retract Flatrack Locks - Continued
NOTE
If locks do not retract, recharge the air system by performing Steps (5)
through (11).
6.
Couple service and gladhand (Figure 3, Item 1) to vehicle.
1
Figure 3.
Retract Flatrack Locks.
7.
Push in trailer air supply knob in cab of vehicle. Refer to vehicle Operator's manual
(WP
0057).
8.
With vehicle engine running, allow 3 to 5 minutes for air system to recharge.
NOTE
The flatrack locks indicating pins should be retracted IN when the flatrack
locks are released. There is one indicating pin on each side of the trailer.
9.
Push in flatrack locking knob (Figure 4, Item 2) to retract locks (Figure 4, Item 1).
TM 9-2330-342-10
0014
0014-4