TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 125 of 500

OPERATOR MAINTENANCE

RELEASE/APPLY PARKING BRAKES (NORMAL)

INITIAL SETUP:

References

WP

0020

WP

0057

Release Parking Brakes

WARNING

Trailer wheels must be chocked or drawbar connected to vehicle before

coupling trailer gladhands to vehicle. Failure to comply may result in injury

or death to personnel.

NOTE

•

The following procedure is used when the trailer is not hooked to

the vehicle.

•

Parking brakes are set automatically when gladhands are

unhooked.

•

Parking brakes are released when gladhands are connected and

trailer air supply knob in cab is pushed in.

•

If trailer parking brakes do not release, perform Steps (2) through

(11) and pressurize air system.

1.

Chock trailer wheels (WP

0020).

2.

To release trailer parking brakes, push in trailer parking brake knob (Figure 1, Item 1)

(located on trailer).

TM 9-2330-342-10

0016

0016-1