Apply Parking Brakes - Continued
2.
Remove nuts (Figure 3, Item 1) and washers (Figure 3, Item 2) from caging bolts
(Figure 3, Item 3) and brake chambers (Figure 3, Item 5).
3.
Remove caging bolts (Figure 3, Item 3) from brake chambers (Figure 3, Item 5).
4.
Install protective caps (Figure 3, Item 4) on rear of brake chambers (Figure 3, Item 5).
5.
Install caging bolts (Figure 3, Item 3) in storage position and secure with washers
(Figure 3, Item 2) and nuts (Figure 3, Item 1).
END OF TASK
END OF WORK PACKAGE
TM 9-2330-342-10
0017
0017-4