TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 135 of 500

OPERATOR MAINTENANCE

PREPARATION FOR LOADING FLATRACK

INITIAL SETUP:

References

WP

0010

WP

0015

WP

0020

WP

0022

WP

0057

Equipment Condition

Cart in flatrack mode. (WP

0003)

Cart in bumper mode when loading

EMM concrete mixer or EMM

dump body. (WP

0003)

Preparation For Loading

WARNING

Trailer wheels must be chocked prior to loading the flatrack. Failure to

comply may result in injury or death to personnel.

CAUTION

•

Ensure trailer drawbar is down against the ground or damage to

equipment may result.

•

Ensure that air lines and cables are properly stowed or damage

to equipment may result.

•

Both trailer bumper points must be under the vehicle bumper stop

flange and at least one of the bumper points must contact the

bumper stop. The trailer bumper point not contacting the vehicle

bumper stop cannot exceed 0.5 in. (12.7 mm) or flatrack will miss

main rail guides and equipment damage may result.

1.

Chock trailer wheels (WP

0020) and lower drawbar (Figure 1, Item 4).

TM 9-2330-342-10

0018

0018-1