OPERATOR MAINTENANCE
RETRACTION/ENGAGEMENT OF FLATRACK LOCKS (MANUAL)
INITIAL SETUP:
References
WP
0020
Retract Flatrack Locks
NOTE
•
Use manual procedure only if normal procedure will not work.
•
Locks will automatically engage unless air pressure holds them
retracted.
•
The flatrack locks indicating pins should be extended OUT when
the flatrack locks are locked. There is one indicating pin on each
side of the trailer.
1.
Ensure trailer is uncoupled and ready to be unloaded.
2.
Chock trailer wheels (WP
0020).
3.
Remove protective plugs (Figure 1, Item 3) from threaded frame holes (Figure 1, Item
2).
4.
Remove unlocking rod from stowage box.
TM 9-2330-342-10
0015
0015-1