TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 118 of 500

Retract Flatrack Locks - Continued

2.

Push in flatrack locking knob (Figure 1, Item 2) to retract locks (Figure 1, Item 1).

CAUTION

Ensure both flatrack locks are fully retracted or damage to equipment may

result.

NOTE

The flatrack locks indicating pins should be retracted IN when the flatrack

locks are released. There is one indicating pin on each side of the trailer.

3.

Visually check both locks (Figure 2, Item 1) to ensure locks are retracted.

RETRACTED

LOCKS

INDICATING

PIN

ENGAGED

LOCKS

1

FLATRACK LOCKING

KNOB (REAR OF TRAILER)

2

Figure 2.

Retract Flatrack Locks.

4.

The following procedure should be performed when the flatrack locks on the trailer

will not release:

a.

Chock trailer tires at Axle No. 2 and No. 3 locations. Push flatrack locking knob

(Figure 2, Item 2) in on trailer. Verify that the locks (Figure 2, Item 1) have not

released (check indicating pins on the left and right side of the trailer).

TM 9-2330-342-10

0014

0014-2