TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 154 of 500

UNSTOW - Continued

NOTE

•

Both ISO locks are removed the same way. Outboard ISO lock

shown.

•

Note position of two ISO locks prior to removal to ensure proper

installation.

4.

Remove gravity lock hitch pin (Figure 2, Item 3) and ISO lock (Figure 2, Item 1) from

ISO lock bracket (Figure 2, Item 2).

2

3

1

Figure 2.

ISO Lock Unstow.

5.

Repeat Step (4) for inboard ISO lock.

NOTE

•

Both ISO locks are installed the same way. Right side shown.

•

Ensure ISO lock adjustment screw faces outboard.

6.

Install ISO lock (Figure 3, Item 8) on ISO lock mount (Figure 3, Item 6) with ISO lock

adjustment screw (Figure 3, Item 4) facing outboard.

TM 9-2330-342-10

0024

0024-2