TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 156 of 500
STOW
1.
Remove crank handle (Figure 4, Item 1) from BII stowage box (Figure 4, Item 2).
1
UNLOCKED
LOCKED
2
8
3
3
4
5
6
7
Figure 4.
ISO Lock Stow.
CAUTION
To minimize damage to ISO locks when they are stowed on ISO lock
bracket, ensure ISO lock hook does not move. Failure to comply may
result in damage to equipment.
NOTE
Both ISO locks are removed the same way. Right side shown.
2.
With the aid of a crank handle (Figure 4, Item 1), rotate ISO lock adjustment screw
(Figure 4, Item 4) clockwise until ISO lock hook (Figure 4, Item 3) does not move.
3.
Remove safety lock pin (Figure 4, Item 7) from ISO lock mount (Figure 4, Item 6).
4.
Remove hitch pin (Figure 4, Item 5) from ISO lock (Figure 4, Item 8) and ISO lock
mount (Figure 4, Item 6).
TM 9-2330-342-10
0024
0024-4
Back to Top
