TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 157 of 500
STOW - Continued
5.
Remove ISO lock (Figure 4, Item 8) from ISO lock mount (Figure 4, Item 6).
6.
Repeat Steps (2) through (5) for left side ISO lock.
7.
Stow crank handle (Figure 4, Item 1) in BII stowage box (Figure 4, Item 2).
CAUTION
To minimize damage to ISO lock adjustment screw, install ISO lock facing
inboard. Failure to comply may result in damage to equipment.
NOTE
•
Both ISO locks are installed the same way. Inboard ISO lock
shown.
•
Install ISO locks as noted prior to removal.
8.
Install ISO lock (Figure 5, Item 3) on ISO lock bracket (Figure 5, Item 2) with gravity
lock hitch pin (Figure 5, Item 1).
1
2
3
Figure 5.
ISO Lock Stow.
9.
Repeat Step (8) for outboard ISO lock.
TM 9-2330-342-10
0024
0024-5
Back to Top
