TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 160 of 500
CONTAINER MODE TO FLATRACK MODE - Continued
2
3
4
1
5
6
7
Figure 1.
Container Mode to Flatrack Mode.
2.
Remove hitch pin (Figure 1, Item 1) from cart pivot bracket (Figure 1, Item 4) and cart
bracket (Figure 1, Item 3).
3.
Remove lynch pin (Figure 1, Item 7) from hitch pin (Figure 1, Item 6).
4.
Remove hitch pin (Figure 1, Item 6) from cart pivot bracket (Figure 1, Item 4) and
trailer bracket (Figure 1, Item 5).
5.
Repeat Steps (1) through (4) for right side cart pivot bracket.
6.
Start engine. Refer to vehicle Operator's manual (WP
0057).
7.
Turn hydraulic selector switch to AUTO position. Refer to vehicle Operator's manual
(WP
0057).
WARNING
•
Check for overhead power lines or other obstructions before
attempting LHS operation. Failure to comply may result in injury
or death to personnel.
•
Ensure all personnel are clear of the vehicle, trailer, and cart
during LHS operations. Failure to comply may result in injury or
death to personnel.
TM 9-2330-342-10
0025
0025-2
Back to Top
