TRAILER CONNECT - Continued
22.
Start vehicle and slowly back up until drawbar (Figure 5, Item 3) makes contact and
locks with coupler (Figure 5, Item 2). Refer to vehicle Operator's manual (WP
0057).
NOTE
Use trailer hand brake control to apply trailer brakes while pulling vehicle
forward.
23.
Pull vehicle forward slightly to verify coupler (Figure 5, Item 2) has latched onto
drawbar (Figure 5, Item 3).
NOTE
If trailer fails to hook up, repeat Steps (22) and (23).
24.
Shut OFF engine. Refer to vehicle Operator's manual (WP
0057).
25.
Release air pressure by moving air assist lever (Figure 6, Item 1) down for 5 seconds.
2
3
4
1
DRAWBAR
LIFT
RAISE
NEUTRAL
LOWER
Figure 6.
Trailer Connect.
26.
Close locking gate (Figure 6, Item 2) on coupler (Figure 6, Item 3).
27.
Unlock rotation locking pin (Figure 6, Item 4) on coupler (Figure 6, Item 3).
28.
Remove cover (Figure 7, Item 5) from vehicle receptacle (Figure 7, Item 4).
TM 9-2330-342-10
0010
0010-7