TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 88 of 500
TRAILER CONNECT - Continued
3
8
1
2
4
5
3
6
7
2
3
Figure 7.
Trailer Connect.
29.
Connect load lock status line (Figure 7, Item 3) to vehicle receptacle (Figure 7, Item
4).
WARNING
The 24 volt cable must be used when connecting trailer to PLS M1074A1
or PLS M1075A1. If 24 volt cable is not used there will be no trailer brake
lights. Failure to comply may result in injury or death to personnel.
CAUTION
•
Both the 12 volt and 24 volt cables must not be connected at the
same time. Only one cable can be hooked up during operation
or damage to equipment will result.
•
Ensure that receptacle latch is engaged on cable or damage to
cable may result.
TM 9-2330-342-10
0010
0010-8
Back to Top
