TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 89 of 500
TRAILER CONNECT - Continued
NOTE
•
The 12 volt cable is standard for this trailer (except when being
used with PLS M1074A1 and PLS M1075A1). Use the 24 volt
system only when the 12 volt cable cannot be used or blackout
lights are used.
•
Perform Steps (30) and (31) for 12 volt system only.
•
Cables are located in the stowage box.
30.
Remove cover (Figure 7, Item 8) from 7-pin receptacle (Figure 7, Item 1) on trailer
and connect 12 volt cable (Figure 7, Item 2) on receptacle (Figure 7, Item 1).
31.
Lift receptacle cover (Figure 7, Item 6) on vehicle and connect 12 volt cable (Figure
7, Item 2) on receptacle (Figure 7, Item 7).
NOTE
Perform Steps (32) and (33) for 24 volt system.
32.
Remove cover (Figure 8, Item 5) from 12-pin receptacle (Figure 8, Item 1) on trailer
and connect 24 volt cable (Figure 8, Item 4) on receptacle (Figure 8, Item 1).
TM 9-2330-342-10
0010
0010-9
Back to Top
