TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 94 of 500
TRAILER DISCONNECT - Continued
6
3
1
2
1
4
5
6
7
5
Figure 12.
Trailer Disconnect.
5.
Remove service air gladhand (Figure 12, Item 5) from air coupling (Figure 12, Item 4)
and stow on stowage coupler (Figure 12, Item 7).
6.
Install covers (Figure 12, Item 6) on air couplings (Figure 12, Item 3) and (Figure 12,
Item 4).
CAUTION
Both the 12 volt (7-pin) and 24 volt (12-pin) cables must not be connected
at the same time. Only one cable can be hooked up during operation or
damage to equipment will result.
NOTE
•
Perform Steps (7) and (8) if the 24 volt (12-pin) cable is installed.
•
Perform Steps (9) and (10) if the 12 volt (7-pin) cable is installed.
7.
Remove 24 volt cable (Figure 13, Item 4) from receptacle (Figure 13, Item 3) on vehicle
and close receptacle cover (Figure 13, Item 2).
TM 9-2330-342-10
0010
0010-14
Back to Top
