TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

  TM-9-2330-342-23-P - Page 155 of 1348

C
L
O
S
E
O
P
E
N
COVER
REAR JUNCTION
BOX
WIRE 1012B
1435
1435
1008B
1012B
1680C
1678C
1003C
1004C
Figure 2.
Rear Junction Box and Wire 1012B.
5.
Visually check if trailer main harness wire 1012B can be repaired.
CONDITION/INDICATION
Can trailer main harness wire 1012B be repaired?
DECISION
Repair - Repair wire 1012B (WP
0055). Go to (Step 8 - Do rear side marker lights operate?) to verify problem is
solved.
No Repair - Replace trailer main harness (WP
0059). Go to (Step 8 - Do rear side marker lights operate?) to verify
problem is solved.
STEP 3
Are 10 to 14 vdc measured on wire 1012B at rear side marker light?
WARNING
Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.
Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a
direct short, severe burns, or electrical shock. Failure to comply may result in injury or death
to personnel.
1.
Have assistant turn OFF lights. Refer to vehicle Operator's manual (WP
0190).
2.
Have assistant turn engine start switch to OFF. Refer to vehicle Operator's manual (WP
0190).
3.
Disconnect wire 1012B from nonoperating rear side marker light.
TM 9-2330-342-23&P
0010
0010-3


Back to Top