TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 162 of 1348

C

L

O

S

E

O

P

E

N

COVER

REAR JUNCTION

BOX

WIRE 1012B

1435

1435

1008B

1012B

1680C

1678C

1003C

1004C

Figure 1.

Rear Junction Box and Wire 1012B.

2.

Connect button probe cable to MSD/ICE test equipment (WP

0004).

3.

Connect button probe cable red lead to rear junction box, terminal wire 1012B.

4.

Connect button probe cable black lead to a known good ground.

5.

Have assistant turn engine start switch to ON. Refer to vehicle Operator's manual (WP

0190).

6.

Have assistant turn ON lights. Refer to vehicle Operator's manual (WP

0190).

7.

Perform ICE Test 89.

8.

Meter should display a reading between 10 and 14 vdc.

CONDITION/INDICATION

Are 10 to 14 vdc measured on wire 1012B at rear junction box?

DECISION

Voltage OK - Go to (Step 3 - Do rear side marker lights, and rear marker lights operate?) to verify problem is solved.

Voltage Faulty - Go to (Step 2 - Can trailer main harness wire 1012B be repaired?).

STEP 2

Can trailer main harness wire 1012B be repaired?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

TM 9-2330-342-23&P

0011

0011-2