TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 180 of 1348

BLACK

RED

Figure 1.

Button Probe Leads.

2.

Connect button probe cable red and black leads together.

3.

Perform ICE Offset Test 91.

CONDITION/INDICATION

Does test equipment pass offset test?

DECISION

Yes - Go to (Step 2 - Is continuity measured between wire 1435 at LED composite light and a known ground?).

No - Test equipment failed offset. Contact your Supervisor.

STEP 2

Is continuity measured between wire 1435 at LED composite light and a known ground?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

1.

Disconnect wire 1435 from nonoperating light.

TM 9-2330-342-23&P

0013

0013-2