TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 173 of 1348

STEP 8

Does test equipment pass offset test?

1.

Have assistant release brake pedal. Refer to vehicle Operator's manual (WP

0190).

BLACK

RED

Figure 8.

Button Probe Leads.

2.

Connect button probe cable red and black leads together.

3.

Perform ICE Offset Test 91.

CONDITION/INDICATION

Does test equipment pass offset test?

DECISION

Yes - Go to (Step 9 - Is continuity measured across wire 1003C between diode assembly connector, terminal 1 and

the rear junction box?).

No - Test equipment failed offset. Contact your Supervisor.

STEP 9

Is continuity measured across wire 1003C between diode assembly connector, terminal 1 and the rear

junction box?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

1.

Disconnect diode assembly from diode assembly connector (WP

0059).

2.

Connect button probe cable red lead to wire 1003C at diode assembly connector, terminal 1.

TM 9-2330-342-23&P

0012

0012-9