TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 912 of 1348
INSTALLATION - Continued
1.
Using a wire scratch brush, remove paint from area 4.0 in. (102 mm) around welding points on frame (Figure
2, Item 5) and transport pin (Figure 2, Item 1).
2
3
4
5
6
1
Figure 2.
Flatrack Transport Pin and Spring Clip Installation.
2.
Weld chain (Figure 2, Item 6) on transport pin (Figure 2, Item 1).
3.
Weld chain (Figure 2, Item 6) on frame (Figure 2, Item 5).
4.
Install spring cup (Figure 2, Item 3) on trailer frame (Figure 2, Item 5) with screw (Figure 2, Item 2) and locknut
(Figure 2, Item 4).
5.
Install transport pin (Figure 2, Item 1) on spring clip (Figure 2, Item 3).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Spot paint exposed areas (TM 43-0139). (WP
0190)
2.
Remove wheel chocks (TM 9-2330-342-10). (WP
0190)
END OF TASK
END OF WORK PACKAGE
TM 9-2330-342-23&P
0107
0107-4
Back to Top
