REMOVAL - Continued
7
8
9
1
6
FRONT
5
4
3
2
1
UNLOCKING
ROD
Figure 1.
Flatrack Lock Removal.
2.
Install unlocking rod into opposite threaded frame hole (Figure 1, Item 9) of flatrack load lock (Figure 1, Item
1).
3.
Turn unlocking rod clockwise until flatrack load lock (Figure 1, Item 1) is retracted.
4.
Remove cotter pin (Figure 1, Item 3), washer (Figure 1, Item 5), coil spring (Figure 1, Item 6), and washer
(Figure 1, Item 4) from upper locking pin (Figure 1, Item 2). Discard cotter pin.
5.
Remove cotter pin (Figure 2, Item 1) and washer (Figure 2, Item 2) from upper locking pin (Figure 2, Item 4).
Discard cotter pin.
TM 9-2330-342-23&P
0106
0106-2