INSTALLATION - Continued
2.
Install two bushings (Figure 8, Item 2) on load lock (Figure 8, Item 1).
2
1
2
Figure 8.
Flatrack Lock Installation.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
3.
Apply antiseize compound on flatrack load lock (Figure 9, Item 1).
1
2
4
5
3
Figure 9.
Flatrack Lock Installation.
TM 9-2330-342-23&P
0106
0106-6