TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 901 of 1348

FIELD MAINTENANCE

FLATRACK LOCK REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

Goggles, Industrial (WP

0194, Table 1, Item 47)

Tool Kit, General Mechanic's: Automotive

(WP

0194, Table 1, Item 47)

Materials/Parts

Compound, Antiseize (WP

0193, Table 1, Item 22,

23)

Bushing Qty:

2 (WP

0195, Table 1, Item 68)

Pin, Cotter Qty:

2 (WP

0195, Table 1, Item 61)

Pin, Cotter Qty:

1 (WP

0195, Table 1, Item 76)

References

Fig. 38 (WP

0173)

Equipment Condition

Wheels chocked (TM 9-2330-342-10). (WP

0190)

Flatrack removed (TM 9-2330-342-10).

(WP

0190)

Air system drained (TM 9-2330-342-10).

(WP

0190)

Flatrack lock chamber caged. (WP

0105)

REMOVAL

WARNING

Wear proper eye protection and use care when removing and installing springs. Springs are

under tension and can act as projectiles when released. Failure to comply may result in injury

or death to personnel.

NOTE

Both flatrack locks are removed the same way. Right side shown.

1.

Remove cap (Figure 1, Item 8) on cable (Figure 1, Item 7) from threaded frame hole (Figure 1, Item 9).

TM 9-2330-342-23&P

0106

0106-1