TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 915 of 1348
REMOVAL - Continued
1
2
Figure 4.
Front Bumper Extension Bracket Removal.
END OF TASK
INSTALLATION
NOTE
•
Perform Steps (1) and (2) if clevis pin or wire rope was replaced.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
1.
Install clevis pin (Figure 5, Item 2) on 22 in. (56 cm) long wire rope (Figure 5, Item 3) with swagging sleeve
(Figure 5, Item 1).
2
3
4
1
1 in.
(2.5 cm)
1 in.
(2.5 cm)
Figure 5.
Front Bumper Extension Bracket Installation.
2.
Install swagging sleeve (Figure 5, Item 4) on 22 in. (56 cm) long wire rope (Figure 5, Item 3).
NOTE
•
Perform Steps (3) and (4) if lynch pin or wire rope was replaced.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
TM 9-2330-342-23&P
0108
0108-3
Back to Top
