TM-9-2330-356-14
SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1990
TM-9-2330-356-14 - Page 483 of 528
TM 9-2330-356-14
APPENDIX C
COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS
Section I. INTRODUCTION
C-1.
Scope
This appendix lists components of the end item and basic
issue items for the semitrailers to help you inventory items
required for safe and efficient operation.
C-2.
General
These components of End Item and Basic Issue Items
Lists are divided into the following sections:
a.
Section II.
Integral Components of End Item.
This listing is for informational purposes only, and is not
authority to requisition replacements. These items are
part of the end item, but are removed and separately
packaged for transportation or shipment. As part of the
end item, these items must be with the end item whenever
it is issued or transferred between accounts. Illustrations
are furnished to assist you in identifying the items.
b.
Section III.
Basic Issue Items. These are the
minimum essential items required to place the semitrailer
in operation, to operate it, and to perform emergency
repairs. Although shipped separately, packaged BII must
be with the semitrailer during operation and whenever it is
transferred between property accounts. The illustrations
will assist you with hard-to-identify items. This manual is
your authority to request/requisition replacement BII,
based on TOE/MTOE authorization of the end item.
C-3.
Explanation of Columns
The following provides an explanation of columns found
in the tabular listings.
a.
Column (1) –Illustration Number (Illus Number).
This column indicates the number of the illustration in
which the item is shown.
b.
Column (2) –National Stock Number.
Indicates
the National stock number assigned to the item and will be
used for requisitioning purposes.
c.
Column (3) –Description.
Indicates the National
item name and, if required, a minimum description to
identify and locate the item. The last line for each item
indicates the FSCM (in parenthesis) followed by the part
number. If item needed differs for different models of this
equipment, the model is shown under the “Usable On
Code” heading in this column. These codes are identified
as:
Code
Used On
C70, C90
Model M967, M967A1
C72, C92
Model M969, M969A1
C73, C91
Model M970, M970A1
d.
Column (4) – Unit of Measure (U/M).
Indicates
the measure
used in
performing
the actual
operational/maintenance
function. This measure is
expressed by a two-character alphabetical abbreviation
(e.g., ea, in, pr).
e. Column (5)–Quantity required (Qty. rqr).
Indicates the quantity of the item authorized to be used
with/on the equipment.
C-1
Back to Top
