TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1030 of 1364

TM 9-2350-238-20-1

2-173. MAINTENANCE OF HEATER INSTALLATION KIT (CONT).

INSTALLATION (CONT)

10

11

12

13

14

15

16

Untag and disconnect electrical leads.

Connect water hoses. Refer to page

2-1011.

Connect fuel lines. Refer to page 2-1016.

Lower engine coolant heater (25) into hull.

Install 12 washers (26) and 12 screws (27)

in coolant heater mounting plate (28).

Install coolant heater shield (29) on engine

coolant heater (25), and secure with four

new Iockwashers (30) and four hexagon

head capscrews (31).

Install coolant heater exhaust pipe (32) on

engine coolant heater (25), and secure

with four new Iockwashers (33) and four

hexagon head capscrews (34).

2-174. MAINTENANCE OF HEATER INSTALLATION KIT—BATTERY BOX SUPPORTS

AND RELATED ITEMS.

This task covers:

a.

Removal

b.

Inspection/Repair

c.

Installation

INITIAL SETUP

Materials/Parts

Lockwasher (1)

Lockwasher (8)

References

TM 9-2350-238-24P-1

Equipment Conditions

2-640 Batteries removed

2-1004