TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1036 of 1364

TM 9-2350-238-20-1

2-175. MAINTENANCE OF HEATER INSTALLATION KIT—BATTERY BOX AND

COVERS (CONT).

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1

2

3

4

5

6

Install battery box (1) and battery heating

pad (2) in vehicle, and secure with eight

flat washers (3) and eight hexagon head

capscrews (4).

Install three plate assembly anchors (5) in

battery box (1).

Install batteries. Refer to page 2-640.

Install four battery holddown rod end

connectors (6) in battery box (1), and

secure with four headed straight pins (7),

four flat washers (8), and four new cotter

pins (9).

Install three battery retaining plates (10)

and two battery holddown plates (11), and

secure with ten flat washers (12) and ten

hexagon plain nuts (13).

Connect ground leads last when

installing electrical leads to batteries.

Install battery insulation pad (14).

2-1010