TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1041 of 1364

TM 9-2350-238-20-1

10

11

12

13

14

15

16

17

Install two hose clamps (20) and loop

clamp (21) on rubber hose (22).

Install rubber hose (22) on straight adapter

(23) and engine coolant heater assembly,

and install straight adapter on plug cock

(24).

Install two hose clamps (25), two loop

clamps (26), and nonmetallic grommet

(27) on rubber hose (28). Install rubber

hose on straight adapter (29) and battery

box.

Secure loop clamp (21) and two loop

clamps (26) with three new lockwashers

(30) and three machine screws (31).

Install drain cock (32) on engine block

behind fuel filter.

Install two loop clamps (33) and nonmetal-

lic grommet (34) on rubber hose (35), and

install rubber hose on drain cock (32) and

battery box.

Install two hose clamps (36) on rubber

hose (37). Install rubber hose (37), rubber

hose (17), and rubber hose (19) on hose

tee (38). Attach other end of rubber hose

(37) to engine coolant heater centrifugal

pump unit.

Tighten 12 hose clamps.

2-1015