TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1080 of 1364

TM 9-2350-238-20-1

2-184.

MAINTENANCE OF PYROMETER VEHICULAR PANEL AND WARNING lNDlCA-

TOR LIGHT (HEATER INSTALLATION KIT) (CONT).

INSPECTION/REPAIR (CONT)

3

If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

4

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet

inspection criteria.

1

Install pyrometer bracket (1) and identifica-

tion plate (2) on pyrometer panel assembly

(3), and secure with four new Iockwashers

(4) and four machine screws (5).

2

Install indicating pyrometer (6) on pyro-

meter panel assembly (3), and secure with

three new Iockwashers (7) and three hexa-

gon plain nuts (8).

3

Install toggle switch (9) on pyrometer panel

assembly (3), and secure with two ma-

chine screws (10).

4

Install two push switch assemblies (11),

two knobs (12), and four setscrews (13) on

pyrometer panel assembly (3). Connect

electrical leads (14) to push switch

assembly connectors.

5

Install incandescent lamp (15), new war-

ning light preformed packing (16), and light

lens (17) in warning indicator light (1 8).

6 Install warning indicator light (18) on

pyrometer panel assembly (3), and secure

with two new lockwashers (19) and two

machine screws (20).

2-1054