TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1076 of 1364

TM 9-2350-238-20-1

2-182. MAINTENANCE OF HEATER INSTALLATION KIT—ELECTRICALWIRING (CONT).

1

Install battery positive terminal to circuit breaker electrical lead (1) to circuit breaker (2).

2

Untag and connect battery positive terminal to circuit breaker electrical lead (1) to battery

positive terminal (3).

3

Install battery positive terminal to circuit breaker electrical lead (4) to coolant heater circuit

breaker (5).

4

Untag and connect battery positive terminal to circuit breaker electrical lead (4) to battery

positive terminal (6).

5

Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc.

During installation, make sure the wiring harness or lead is secure

and all hardware is tight.

2-1050