TM 9-2350-238-20-1
1
2
3
4
5
Remove bolt (1), Iockwasher (2), and hose
clamp (3) with attached hose (4) from left
rear engine lifting bracket (5).
Disconnect hose (4) from elbow (6) on air
pump (7) and pipe to tube tee on front of
left cylinder head (8) of engine block.
Remove hose clamp (3) from hose (4).
Disconnect hose (9) from check valve
(lo).
Remove nuts (11 and 12) and disconnect
wiring harness leads (13 and 14) from
terminals on air pump (7).
6
Remove bolt (15), Iockwasher (16), flat washer (17), air pump
pump (7) from angle bracket (20).
Remove hose (21 ) and check valve (10) from adapter (22) on
check valve.
clamp (18), cushion (19), and air
air pump (7). Remove hose from
7
2-487