TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 518 of 1364

TM 9-2350-238-20-1

2-54. MAINTENANCE OF AIR BOX HEATER INSTALLATION AND AIR BOX HEATER

ASSEMBLY (CONT).

REASSEMBLY (CONT)

5

Using gap gages, adjust wire (7) to fuel

spark igniter (6) to obtain air gap of 0.080

in. (0.203 cm).

1

2

3

4

5

Install elbows (1 and 2) on solenoid valve (3). Tighten securely.

Install solenoid valve (3), two new Iockwashers (4), and two machine screws (5) to angle

bracket (6). Tighten securely.

Install wiring harness (7).

Install wiring harness receptacle connector (8), four machine screws (9), four new Iockwashers

(10), and four hexagon plain nuts (11) on angle bracket (6).

Connect wiring harness plug connector (12) to solenoid valve (3).

2-492