TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 515 of 1364

TM 9-2350-238-20-1

16

Disconnect fuel hoses (43 and 44) from elbows (45 and 46) on solenoid valve (47). Remove

screw assembly (48) and loop clamp (49) from governor cover. Reinstall screw assembly.

17

Disconnect fuel hose (43) from tee (50) on left cylinder head. If necessary, remove clamp loop

(49) from fuel hose. Remove fuel hose.

18

Remove tee (50) from left cylinder head.

19

Remove two hexagon head capscrews (51), two lockwashers (52), and two flat washers (53)

securing wiring harness leads (54 and 55) to air inlet housing. Remove leads.

20

Remove two hexagon head capscrews (56) and two Iockwashers (57) securing angle bracket

(20) to fuel pump support (58).

21

Remove two machine screws (59), two lockwashers (60), and four flat washers (61) and angle

bracket (20) from governor housing.

2-489