TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 816 of 1364
TM 9-2350-238-20-1
2-136. MAINTENANCE OF HYDRAULIC POWER SUPPLY LINES AND FITTINGS
(FORWARD SECTION).
This task covers:
a.
Removal
b.
Inspection/Repair
c.
Installation
INITIAL SETUP
Materials/Parts
Locknut (2)
Lockwasher (10)
Preformed packing (2)
Preformed packing (2)
Tube locknut (3)
References
TM 9-2350-238-24P-1
Equipment Conditions
2-952 Driver's seat removed
2-928 Driver's compartment forward and
aft cowls removed
REMOVA L
General Safety Instructions
•
•
•
To avoid injury to personnel, do
not tighten or loosen hydraulic
fittings when system is pressur-
ized.
Lower the boom to stowed posi-
tion before doing any mainte-
nance on hydraulic system.
Wipe up any spilled hydraulic
fluid to prevent injury to
personnel.
2-790
Back to Top
