TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 353 of 495

WARNING

TM 9-2350-238-20- 2

INSTALLATION

1

2

3

4

5

•

•

Make sure MASTER switch i s

OFF before repairing electrica l

components. Failure to observ e

this warning could result in in-

jury or death .

Failure to remove or disconnec t

the batteries before removing o r

installing any electrical wirin g

harness or lead may result in in-

jury or damaged equipment .

Install shock assembly mount (1), groun d

cable assembly (2), and frame assembly

(3) and secure using four assemble d

washer bolts (4) .

Install two shock mount to boom cylinder s

hose clamps (5) and (6). Install gas par-

ticulate filter unit (7) in frame assembly

(3) and secure by engaging holddow n

latch (8) .

Connect M10 hose assembly (9) and M 7

hose assembly (10) to gas particulate filter

unit (7) .

Connect and screw in connector (11) t o

gas particulate filter unit (7) .

Connect ground cable assembly (2) to gas

particulate filter unit (7). Tighten machin e

screw (12). Turn MASTER switch to ON .

2-31 3