TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 355 of 495

WARNING

TM 9-2350-238-20- 2

2

3

4

5

6

Disconnect cable assembly (4) from circuit breaker (3) .

Disconnect electrical lead (5) from toggle switch (2) .

Remove two assembled washer bolts (6 )

and angle bracket (7) .

Remove two hexagon plain nuts (8), tw o

Iockwashers (9), two machine screw s

(10), and circuit breaker (3) from angl e

bracket (7) .

Remove two machine screws (11), tw o

Iockwashers (12), and toggle switch (2 )

from angle bracket (7) .

INSPECTION/REPAI R

1

Inspect for broken, damaged, or missin g

parts .

2

Repair is by replacement of authorize d

parts (TM 9-2350-304-24P-2) .

REASSEMBLY/lNSTALLATIO N

1

2

3

• Make sure MASTER switch is

OFF before repairing electrica l

components. Failure to observ e

this warning could result in in-

jury to personnel .

• Failure to remove or disconnec t

the batteries before removing o r

installing any electrical wirin g

harness or lead may result in in-

jury or damaged equipment .

Install toggle switch (1), two new lock-

washers (2), and two machine screws (3 )

on angle bracket (4) .

Install circuit breaker (5), two machin e

screws (6), two new Iockwashers (7), an d

two hexagon plain nuts (8) on angl e

bracket (4) .

Install angle bracket (4) and secure wit h

two assembled washer bolts (9) .

2-31 5