WARNING
TM 9-2350-238-20- 2
Make sure MASTER switch is OFF before repairing electrical com-
ponents. Failure to observe this warning could result in injury t o
personnel .
Step 4 .
Disconnect lead 100 (1) from slip ring (2). Place red probe in slip rin g
receptacle (3). Ground black probe. Set MASTER switch ON. If multimete r
indicates about 24 volts, repair lead 100, refer to page 2-66. If multimeter
indicates no voltage, notify direct support maintenance. Set MASTE R
switch OFF. Connect lead .
2-3 3