TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 89 of 292
TM 9-2350-238-34-1
2
3
4
5
6
7
Install new shell gasket (6) and slip ring
disconnect to interior disconnect wirin g
harness (7) to slip ring (3), and secure
with four socket head capscrews (8) an d
new Iockwire (9). Pull slip ring disconnec t
to interior disconnect wiring harness (7) up
through top of slip ring.
If removed, install eight new cover
assembly plain studs (10) to slip ring (3).
Wipe top of slip ring (3) with lint-free cloth
to remove dirt or dust.
Install new preformed packing (11) in top
flange of slip ring (3).
Apply thin, even coat of grease to mating
surface of new slip ring electrical contact
set assembly (12) in slip ring (3).
Connect slip ring to 24-volt feed electrical
lead (2) to slip ring electrical contact set
assembly (12), and secure with hexago n
head capscrew (13), new Iockwasher (14) ,
and hexagon plain nut (15).
2-7 7
Back to Top
