TM-9-2350-238-34-1
HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1994
TM-9-2350-238-34-1 - Page 97 of 292
CAUTION
TM 9-2350-238-34-1
2
3
4
5
Mating edge of outer contact set
holder and inner edge of holder
housing are bonded together wit h
sealing compound. When separating ,
use extreme care to avoid damage .
Place two wood blocks under holder housin g
(3) with outer contact set holder (4) facing
down .
Using hammer and soft block, lightly tap
inner contact set holder (5) until inner
contact set holder and outer contact set
holder (4) separate from holder housin g (3).
Remove inner insulating ring (6) from inner
contact set holder (5).
Remove upper insulating ring (7) from outer
contact set holder (4).
2-8 5
Back to Top
