TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 150 of 796
REMOVAL
NOTE
•
Perform Steps 1, 2, and 4 through 9 when disconnecting external lights using the
accessories panel power adapter.
•
Perform Steps 1 and 3 through 9 when disconnecting external lights using the
vehicle slave adapter.
1.
Turn vehicle master power off (WP 0004).
2.
Disconnect wiring harness 12543898 J1 (Figure 3, Item 4) from accessories power adapter
P1 (Figure 3, Item 3), Remove accessories power adapter end (Figure 3, Item 2) from accessories power
port (Figure 3, Item 1) on accessories panel.
3.
Remove slave adapter (Figure 3, Item 22) from vehicle slave port (Figure 3, Item 20). Disconnect slave
adapter P1 (Figure 3, Item 21) from wiring harness assembly 12543898 J1 (Figure 3, Item 4).
4.
Disconnect wiring harness assembly 12543898 P1 (Figure 3, Item 5) from switch assembly
J1 (Figure 3, Item 6).
5.
Disconnect switch assembly P1 (Figure 3, Item 7) from wiring harness assembly 12543899
J1 (Figure 3, Item 8).
6.
Disconnect wiring harness assembly 12543899 P2 (Figure 3, Item 14) from LED light assembly
(Figure 3, Item 16) J1 (Figure 3, Item 15).
7.
Disconnect wiring harness assembly 12543899 P1 (Figure 3, Item 13) from wiring harness assembly
12543899 J1 (Figure 3, Item 9).
8.
Disconnect wiring harness assembly 12543899 P1 and P2 (Figure 3, Items 10 and 12) from
J1 (Figure 3, Items 11 and 17) on LED light assemblies (Figure 3, Items 18 and 19).
9.
Remove LED light assemblies (Figure 3, Items 16, 18, and 19) from vehicle and store in
approved container.
TM 9-2350-256-10
0023
0023-4
Back to Top
