TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 376 of 796
DEPLOYING CABLES
WARNING
•
Wire ropes can become entangled, frayed, or contain broken wires. Wear heavy
leather-palmed gloves when handling wire rope. Do not allow moving wire rope to
slide through hands, even when wearing gloves. Failure to comply may result in
personnel injury.
•
Do not bend or loop cables when rigging vehicle for towing. This will weaken
cables and cause them to break. Failure to comply may result in personnel death,
injury, and/or damage to equipment.
1.
Loosen wingnut (Figure 1, Item 2) on each clamp (Figure 1, Item 3) and pull three clamps off each cable
(Figure 1, Item 1).
2.
Repeat step for other cable.
Figure 1.
Cable Clamps.
END OF TASK
CONNECTING CABLES
WARNING
Use extreme caution when moving vehicle into position. Ensure personnel stay out from
between vehicles while M88A1 is being positioned. Failure to comply may result in
personnel death or injury.
CAUTION
Do not connect any tow cables to the lifting eyes during tow operation. Failure to comply
may result in damage to equipment.
TM 9-2350-256-10
0069
0069-2
Back to Top
