TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

  TM-9-2350-256-10 - Page 374 of 796

STOWING TOW BAR
WARNING
Ensure disabled vehicle will not move after it is disconnected from the M88A1. If final
drives of disabled vehicle were disconnected for towing, disabled vehicle will not have any
brakes. Chock the track on the towed vehicle before moving between vehicles to
disconnect tow bar. Failure to comply may result in movement of the disabled vehicle
causing personnel death, injury, and/or damage to equipment.
1.
Position tow bar (Figure 6, Item 7) in clamps (Figure 6, Item 6).
2.
Tighten nuts (Figure 6, Item 5) in clamps (Figure 6, Item 6) to secure.
3.
Loosen nuts (Figure 6, Item 2) securing deflector assembly brackets (Figure 6, Item 1) to engine deck studs
(Figure 6, Item 3).
4.
Position deflector assembly (Figure 6, Item 4) at full-down position and secure nuts (Figure 6, Item 2).
Figure 6.
Tow Bar Stowage.
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0068
0068-8


Back to Top