TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 575 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – Weekly - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

1. Check air restriction gauge (WP 0119) and if

necessary, perform Step 2.

2. Remove dust cover and clean dust and debris from

the cover, filter housing, and filter element (WP 0119).

Any holes or tears in the

air filter element, dust

cover seal, or air

induction tubes. Any

missing hose or hose

clamps. Air cleaner

unserviceable.

3. Check for damaged or unserviceable components of

air cleaner system.

17

WEEKLY

Mechanical

Transmission

1. Open floor access plate #9 (WP 0027).

NOTE

If oil level is on F mark, proceed to Step 4.

2. Remove oil gauge rod to verify oil level is to the F

mark on gauge rod.

3. Add proper grade oil if level is not to F mark

(WP 0101).

4. Insert oil gauge rod.

5. Check area of mechanical transmission for any

leaks.

Any Class III oil leaks.

6. Check Power Takeoff (PTO) shaft boot for proper

installation and tears.

7. Close floor access plate #9 (WP 0027).

Figure 13.

Mechanical Transmission Breather Cap and Oil Gauge Rod.

TM 9-2350-256-10

0099

0099-15