TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 572 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – Weekly - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

15

WEEKLY

Hydraulic

Reservoir Oil

Level

CAUTION

Do not overfill the hydraulic reservoir.

Failure to comply may result in

damage to equipment.

NOTE

If vehicle is equipped with chassis-mounting

bracket, proceed with Step 1. If vehicle is

not equipped with chassis-mounting

bracket, proceed to Step 2.

1. Turn knob securing chassis-mounting bracket

counterclockwise to loosen and reposition chassis-

mounting bracket.

2. Remove floor access plate #8 (WP 0027).

NOTE

•

Oil level should be checked with

boom in stowed position.

•

If oil gauge level is at FULL mark

in Step 3, proceed to Step 5.

3. Remove oil gauge rod, wipe clean, and reinsert oil

gauge rod to verify oil level reaches the BOOM DOWN

mark.

4. Remove filler cap and add proper grade oil to bring

oil level to BOOM DOWN mark (WP 0101). Install filler

cap.

5. Insert oil gauge rod and install floor access plate #8

(WP 0027).

TM 9-2350-256-10

0099

0099-12