TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 590 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – Monthly - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

12

MONTHLY

Rear Spade

Cylinder Pins

1. Open floor access plate #12 and remove floor

access plate #3 (WP 0027).

2. Lubricate rear spade cylinder pin through fittings

(WP 0101).

3. Close floor access plate #12 and install floor access

plate #3 (WP 0027).

Figure 13.

Rear Spade Cylinder Pins.

13

MONTHLY

Power Takeoff

(PTO) Shaft and

Universal Joint

(Crew

Compartment)

1. Open floor access plate #9 (WP 0027).

2. Loosen boot clamp and pull boot back to gain

access to universal joint.

3. Pull and hold manual fuel shutoff lever and bump

starter button (WP 0004) to rotate universal joint to

gain access to two fittings.

4. Lubricate PTO shaft and universal joint through two

grease fittings until grease is visible (WP 0101).

5. Slide boot over universal joint and secure

with clamp.

6. Close floor access plate #9 (WP 0027).

TM 9-2350-256-10

0100

0100-8