Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) – Monthly - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
25
MONTHLY
Rear Stayline
Arm Cylinder
Pins
NOTE
Reuse lockwashers for installation. When
mission permits, notify maintenance to
replace lockwashers.
1. Remove two engine deck grilles (WP 0030).
2. Remove four bolts, four lockwashers, and two
stayline cylinder access covers.
3. Lubricate through four fittings until grease is visible
(WP 0101).
4. Install two stayline cylinder access covers and
secure with four bolts and four lockwashers.
5. Install two engine deck grilles (WP 0030).
Figure 26.
Rear Stayline Arm Cylinder Pins.
26
MONTHLY
Steering and
Shifting Linkage
Bellcranks
1. Remove operator side engine deck grille (WP 0030)
and open rear engine deck grille (WP 0030).
2. Open transmission access doors.
3. Lubricate through eight fittings until grease is visible
(WP 0101).
TM 9-2350-256-10
0100
0100-16