TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 607 of 796

MAIN ENGINE OIL SAMPLING - Continued

WARNING

•

Hot surfaces can ignite engine oil. Clean oil from and around sampling area with

wiping rags. Failure to comply may result in personnel death, injury, and/or

damage to equipment.

•

Surface may be HOT on contact and cause burns to exposed skin. Do not touch

surface with bare hands. Failure to comply may result in personnel injury.

4.

Lift oil sampling valve lever and fill bottle to required level.

CAUTION

Ensure oil sampling valve is parallel to oil filter cover and that protective cap is installed

and secured on sampling valve. Failure to properly position oil sampling valve lever and

secure protective cap may result in loss of engine oil and damage to equipment.

5.

Install protective cap on sampling valve (Figure 1).

6.

Install front engine deck grilles (WP 0030).

Figure 1.

Main Engine AOAP Sampling Valve Location.

TM 9-2350-256-10

0101

0101-5