OPERATOR MAINTENANCE
LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Grease gun (WP 0132, Table 2, Item 41)
Offset funnel (WP 0132, Table 2, Item 25)
Materials/Parts
Engine lubricating oil Qty: AR
(WP 0134, Table 1, Item 33)
Engine lubricating oil (Arctic) Qty: AR
(WP 0134, Table 1, Item 30)
Gear lubricating oil (GO-75/90) Qty: AR
(WP 0134, Table 1, Item 37)
Gear lubricating oil (GO-80/90) Qty: AR
(WP 0134, Table 1, Item 39)
Gear lubricating oil (GO-85/140) Qty: AR
(WP 0134, Table 1, Item 42)
General purpose lubricating oil Qty: AR
(WP 0134, Table 1, Item 45)
Grease, Automotive and Artillery (GAA) Qty: AR
(WP 0134, Table 1, Item 20)
Hydraulic lubricating oil (CAT 10) Qty: AR
(WP 0134, Table 1, Item 46)
Leather gloves (WP 0133, Table 1)
Lubricating oil Qty: AR
(WP 0134, Table 1, Item 49)
Oil sample bottles Qty: AR
(WP 0134, Table 1, Item 6)
Oil sample tubing Qty: AR
(WP 0134, Table 1, Item 78)
Materials/Parts (cont.)
Rubber gloves Qty: AR
(WP 0134, Table 1, Item 16)
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Wire rope grease Qty: AR
(WP 0134, Table 1, Item 21)
References
Auxiliary Power Unit (APU) compartment door
operation (WP 0033)
DA PAM 750-8 (WP 0131)
Engine deck door operation (WP 0028)
Engine deck grilles operation (WP 0030)
Hoist winch operation (WP 0079)
Main winch operation (WP 0080)
MIL-PRF-10924 (WP 0131)
MIL-PRF-18458 (WP 0131)
MIL-PRF-2104 (WP 0131)
MIL-PRF-32033 (WP 0131)
MIL-PRF-46167 (WP 0131)
Preventive Maintenance Checks and Services
(PMCS) – weekly, including lubrication
instructions (WP 0099)
Rear engine deck exhaust grille and exhaust
deflector operation (WP 0029)
TB 43-0211 (WP 0131)
Equipment Condition
Vehicle parked on level surface
WARNING
Accidental or intentional spillage of contaminants into the environment is a violation of
state, federal, and military regulations. Refer to local environmental office for information
concerning storage, use, and disposal of these liquids. Failure to comply may result in
personnel injury and/or damage to environment.
CAUTION
Refer to Tables 2 through 5 for proper use of lubricants and temperature ranges. Using the
wrong lubricant may cause erratic operation of equipment. Failure to comply may result in
damage to equipment.
TM 9-2350-256-10
0101
0101-1